EN 1871:2000
TECHNICAL DATA SHEET (TDS)
WHITE & YELLOW
General
This specification / requirements is covering the purchase of reflective Thermoplastic paint for road marking for white and yellow color lines and horizontal traffic signs.
Material
The materials shall comply with the EN 1871:2000 standard – Road marking materials physical properties.
Technical Characteristics
|
Characteristic, Relative Paragraph of ΕΝ 1871: |
White |
Yellow |
|
Chromatic coordinates - 4.2.1.1 |
Table 2-White |
Table 2-Yellow |
|
Class of luminance Factor β, 4.2.2.1 -Table 5 |
LF4(β≥0,70) |
LF1(β≥0,40) |
|
Softening Point,4.2.1.2 - Table 6 |
SP3((≥95°C) |
SP3((≥95°C) |
|
Cold Impact,4.2.1.4 - Table 7 |
Cl2 |
Cl2 |
|
UV Aging,4.2.1.5-Luminance Factor-Table 3 |
UV1((Δβ≤0,05) |
UV1((Δβ≤0,05) |
|
UV Aging,4.2.1.5-Chromaticity Coordinates-Table 2 |
Table 2-White |
Table 2-Yellow |
|
Heat Stability,4.2.3.1- Chromaticity Coordinates - Table 2 |
Table 2-White |
Table 2-Yellow |
|
Heat Stability,4.2.3.2 - Softening Point |
ΔSP≤±10°C |
ΔSP≤±10°C |
|
Weather Resistant,4.2.2.4 - Table 9 |
TW2( 2,5 – 5,0) |
TW2( 2,5 – 5,0) |
|
Weather Resistant(after UV aging) 4.2.3.6 - Table 10 |
TWU1(0 to 0.5) |
TWU1(0 to 0.5) |
Additional to the above requirements the offered Thermoplastic paint shall appear the below properties / performance, in use that are designated in EN 1436:2007 +A1 Road Marking Materials – Road Marking Performance for road Users:
|
Characteristic, Relative Paragraph of ΕΝ 1436: |
White |
Yellow |
|
Luminance coefficient under diffuse illumination in dry conditions
4.2.2 Table 1 |
Q3 (Qd≥130) |
Q2(Qd≥100) |
|
Retroreflection under vehicle headlamp illumination, Dry road Markings, 4.3, Table 3 |
R4(RL≥200) |
R3(RL≥150) |
|
Chromatic coordinates, 4.4, Table 6. |
Table 6-White |
Table 6-Yellow class Y1 |
|
Skid Resistance.4.5, Table 7 |
S2(SRT≥45) |
S2(SRT≥45) |
Composition of the Thermoplastic paint
The pigment, the glass bead the filler shall be uniformly spread in the resin and complies to the below Table:-
|
Composition of the Thermoplastic paint % per mass |
|||
|
Component |
White |
Yellow |
Red |
|
Binder |
18.0 min |
18.0 min |
18.0 min |
|
Glass Beads – According the
ΕΝ 1424:1997/A1:2003 |
30-40 |
30-40 |
30-40 |
|
Calcium Carbonate and inert Fillers |
42 max |
42 max |
42 max |
|
Titanium Dioxide – According to ASTM D476 Type II(Rutile) |
10.0 min |
------------- |
-------------- |
The granulometry of the Glass Beads that are spread in the Thermoplastic paints shall be as per below Table:
|
Sieves ISO 565:1990 R 40/3 - μm |
Cumulative retained mass (%) |
|
710 |
0-2 |
|
600 |
0-10 |
|
355 |
30-70 |
|
212 |
70-100 |
|
125 |
95-100 |
The maximum acceptable of faulty Glass Beads shall be 20% per weight.
The reflective coefficient shall be above 1.5.
Chip Seal Markers:
Raised pavement Markers, plastic road markers,Road Markers, Road studs, chip seal markers, chip seal markers(TRPMs), temporary chip seal markers, flexible chip seal markers (TRPMs), Chip Seal Temp Markers, TRPMs-Temporary Raised Pavement Markers, TRPMs-Temporary Chip Seal Markers, Temporary Pavement Marker Tabs,chip seal pavement markers, reflective road markers, glass road markers, ceramic road markers, EN1463, ASTM D4280, 43 Glass Beads reflectors, cat eyes, glass cat eyes, Signalisation Temporaire/Panneaux Routiers Temporaires,Plots Rétro-reflechisssant,Temporaire de chaussée en relief marqueur
Road Marking Glass Beads:
Glass Beads for road marking paint, glass beads for road marking, pavement marking glass beads,Drop On glass Beads, Intermix Glass Beads, Premix Glass Beads, highway safety marking glass spheres, glass microspheres, reflective glass beads,all weather beads, high retroreflective beads, high refractive index glass beads,pavement marking, pavement road marking, reflective glass beads for road marking, road marking glass beads, pavement marking & beads, retro reflective drop on glass beads for road marking, glass beads for traffic marking paint, thermoplastic road pavement marking, road marking material,highway safety marking, road markings, EN1423 Drop on glass beads and anti-skidding Aggregates, EN1424 intermix glass beads, BS 6088 Class A intermix glass beads, AASHTO M247 Glass Beads, TT-B-1325D glass beads, Glass beads for road marking,Road Marking Glass Beads, AS/NZS 2009:2006, KSL-2521 Glass Beads, JIS R3301-1987, CNS4342 Glass beads,NBR6831-Glass beads, P98-660-1997 Glass Beads,TIS-543-2550 Road Marking Glass Beads, EN1423 Turkey Glass beads, TT-B-1325D airport marking
