Road Marking Machines
Road Marking Machine LSM-001
Marking Method Thermoplastic screening
Material Container Volume 100L
Glass Beads Container Volume 12L
Heating Method LPG Energy Efficient Burner or LPG Infrared Propane Burner
Directional steering device
Directional steering device for rear wheel
Marking Line Width 50/100/150/200/250/300mm (optional, standard equipped with 150mm)
Marking Line Thickness 1.5–3.0 mm (adjustable)
Dimension
1220mm(L) x 990mm(W) x1100mm(H)
Weight 175 KG
PARTS:
1, Marking Line Container
2, Moving Board
3, Glass Beads Dropping
4,Wheels
5, Glass Beads Container
6, Ignitions
7, Coating Container
8, Pilot
9, Glass Beads Controller
10, Wheels Fixer
Hand-push Thermoplastic
Road Marking Machine LSM-002
Marking Method Thermoplastic screeding
Material Container Volume
Type I / II: 55L, Type III: 90L
Glass Beads Container Volume 12L
Heating Method
LPG Energy Efficient Burner
or LPG Infrared Propane Burner
Directional steering device
Directional steering device for rear wheel
Marking Line Width
50/100/150/200/250/300mm
(optional, standard equipped with 150mm)
Marking Line Thickness
1.5–3.0 mm (adjustable)
Dimension
Type I / II: 1210mm(L) x 890mm(W) x 970mm(H)
Type III: 1210mm(L) x 890mm(W) x 1350mm(H)
Weight
Type I / II: 160 KG
Type III: 165 KG
Hand-guided Self-propelled Thermoplastic Convex Road Marking Machine LSM-003
Engine HONDA or ROBIN 6.0HP gasoline engine
Air Compressor 0.16m³/min
Driver System imported infinitely variable
Driver Speed forward 0-4KM/H, backward 0-3.2KM/H
Max. Hill Climbing Ability 15°
Marking Method Screeding
Electronic Controller digital display intelligent controller
Material Container Volume 65L
Glass Beads Container Volume 14L
Heating Method
Type I: LPG Energy Efficient Burner or LPG Infrared Propane Burner;
Type II: Diesel Injection Burner;
Directional steering device Directional steering device for rear wheel
Marking Line Width
150/200/250/300mm (optional, standard equipped with 150mm)
Marking Line Thickness 1.5–3.0 mm (adjustable)
Dimension 1420mm(L) x 1070mm(W) x 1120mm(H)
Weight 248 Kg
Hand-guided Self-propelled
Thermoplastic Road Marking Machine LSM-004
Engine HONDA or ROBIN 6.0HP gasoline engine
Driver System imported infinitely variable
Driver Speed forward 0-4KM/H, backward 0-3.2KM/H
Max. Hill Climbing Ability 15°
Marking Method Screeding
Material Container Volume 65L
Glass Beads Container Volume 14L
Heating Method
Type I: LPG Energy Efficient Burner or LPG Infrared Propane Burner;
Type II: Diesel Injection Burner;
Directional steering device
Directional steering device for rear wheel
Marking Line Width
50/100/150/200/250/300 mm
(optional, standard equipped with 150mm)
Marking Line Thickness 1.5–3.0 mm (adjustable)
Dimension 1210mm(L) x 890mm(W) x 970mm(H)
Weight 230 Kg
Hand-pushed Cold Paint
Road Marking Machine LSM-005
Engine
ROBIN 6.0HP gasoline engine
Paint pump
Diaphragm pump
Pump Capacity
2.8L/min
Suitable Type
Suitable for cold solvent paint and water-born paint
Marking line width
50-200mm (adjustable)
Qty. of Spray gun
1 hand spray gun
Dimensions
1800X680X930 mm
Weight 87Kg
Hand-pushed Cold Paint and Cold Plastic
Road Marking Machine LSM-006
Engine ROBIN 6.0HP gasoline engine
Delivery Rate
9L/min (single)
Pump
auto-shuttle plunger pump
Suitable Type
Suitable for solvent-based paint and water-born paint
Marking Line Width
100-400mm (adjustable)
Spray gun Number
2 hand spray guns (one of them is 6m longer)
Dimension
1750mm(L) x1000mm(W) x 1250mm(H)
Weight 150 KG
Hand-pushed Cold Paint and Cold Plastic
Road Marking Machine LSM-007
Engine HONDA or ROBIN 9.0HP gasoline engine
Air Compressor Air Output 0.16m³/min (Spraying)
Marking Method high pressure airless spraying
Delivery Rate 9L/min (single)
Max. Rated Working Pressure 20Mpa
Pump and Control Method auto-shuttle plunger pump
Suitable Type
Suitable for solvent-based paint, water-born paint
2-component cold plastic 1:1;
Marking Line Width: 50-500mm (adjustable);
Spray Gun (marking units) Number
2 fixed hand spray guns
Glass Beads Container Volume
6L or 10L (“P”: pressurized for glass beads spray)
Hardener Container Volume
5L (pressurized for 98:2 2-component cold plastic)
Dimension
1750mm(L) x 1000mm(W) x 1250mm(H)
Weight
200 KG / 225 KG
Self-propelled Multifunctional Cold Plastic
Road Marking Machine LSM-008
Engine HONDA or ROBIN 20HP gasoline engine
Air Compressor Air Output 0.45m³/min (Spraying)
Marking Method high pressure airless spraying, structure-marking with 2-component cold plastic and screeding with 2-component cold plastic
Delivery Rate 9L/min (single)
Ma x . Rated Working Pressure 20Mpa
Pump and Control Method auto-shuttle plunger pump
Suitable Type
Suitable for solvent-based paint, water-born paint, 2-component cold plastic paint 1:1 & 98:2, and structure 2-component cold plastic paint;
Marking Line Width
Spraying solvent-based paint, water-born paint or 1:1 2-component cold plastic: 50-500mm (adjustable);
Spraying 98:2 2-component cold plastic: 50-300mm (adjustable);
Structure marking with 2-component cold plastic: 50/100/150/ 200/250/300/350/400/500/600mm (optional), standard equipped with 150mm;
Spray Gun (marking units) Number
2 or 4 hand guns or 1 set of 98:2 2-component cold plastic spray guns or centrifugation, screed bo x ;or for screed 2-component cold plastic: 50/100/150/200/250/300mm (optional), standard equipped with150mm;
Paint Container Volume 2 x 30L
Glass Beads Container Volume 30L
Hardner Container Volume
5L (pressurized for 98:2 2-component cold plastic)
Dimension 2100mm(L) x 1400mm(W) x 1350mm(H)
Weight 350Kg
Self-propelled Two-component Cold Plastic Road Marking Machine for Screeding Marking
Engine
HONDA or ROBIN 6.0HP gasoline engine
Drive Unit imported infinitely variable
Drive Speed forward 0-4KM/H, backward 0-3.2KM/H
Max. Hill Climbing Ability 15°
Air Compressor Air Output 0.45m³/min
Marking Method screeding
Hardener Container Volume 5L
Material Container Volume: 40L
Glass Bead Container Volume 14L
steering device Rear wheel directional steering device
Marking Line Width
50/100/150/200/250/300mm
(optional) standard equipped with 150mm for screeding type
Marking Line Thickness 1.5–3.0 mm (adjustable)
Dimension
1300mm(L) x 950mm(W) x 1200mm(H)
Weight 240 Kg
Self-propelled Two-component Cold Plastic Road Marking Machine for Structure Marking
Engine
HONDA or ROBIN 6.0HP gasoline engine
Drive Unit Imported infinitely variable
Drive Speed Forward 0-4KM/H, backward 0-3.2KM/H
Max. Hill Climbing Ability 15°
Air Compressor Air Output 0.45m³/min
Marking Method Structure marking
Hardener Container Volume 5L
Material Container Volume: 40L
Glass Bead Container Volume 14L
Steering Device Rear wheel directional steering device
Marking Line Width
50/100/150/200/250/300/350/400/450/500/600mm
(optional; standard equipment: one shoe 150mm width)
Marking Line Thickness 1.5–3.0 mm (adjustable)
Dimension
1450mm(L) × 1350mm(W) × 1350mm(H)
Weight 280 KG
